OM-2 mounting sleeve

Use:

Mounting Sleeve OM-2 is used to mount the signalling devices manufactured by the W2 company in suspended ceilings, coffered ceiling, and in plasterboarded spaces. Thanks to the use of such a sleeve, the user is able to “mask” parts of the signaling device. Only the signal-giving optical, acoustic and acoustic-optical part of it remains visible.The use of mounting sleeves is very useful in premises where the aesthetic aspect is particularly valuable (such as hotels, museums, classrooms).

The OM-2 mounting sleeve is intended for mounting only the internal optical-signal devices of the SO-P8 series.


Construction:

Mounting sleeve OM-2 is made of stainless steel powder coated with white colored paint.

Dimensions Ø 155 mm
Weight ~250 g
Diameter of the mounting hole Ø 133 mm
Diameter of the steel cord clamp Ø 10 mm

Mounting method:

To install the mounting sleeve OM-2 cut a hole with a diameter of 133 mm (using a hole saw) in the suspended ceiling. Then remove the spring placed at the top part of the sleeve, and place the selected signaling device in the sleeve as shown on Figure 1. After placing the signaling device, the spring should be returned into place, at a height best suited for mounting the given alarm device. Pressing onto the side springs, insert the sleeve into the mounting hole .

OM-2:

Position 2: Signalling device SO-P8

Figure 1. Installation of SO-P8 visual alarm devices in OM-2 mounting sleeve

Attention:
If necessary, additional suspension of the signalling device with a steel cord is possible as well.

Cooperating products

SO-P8 visual alarm device

SO-P8 VISUAL ALARM DEVICE HOLDS DOCUMENTS ISSUED BY CNBOP-PIB: CERTIFICATE CPR NO. 1438-CPR-0875 CERTIFICATE OF APPROVAL NO. 4826/2023 ATTENTION! Documents…

Choose language