PI-T150 cable junction box

Range of applications:

The PI-T150 cable junction box is destined to be used in telecommunication systems.


Construction:

The blocks, which are destined to connect conductors, are soldered into the printed-circuit board. Box consists of 10 boards each of which can bypass 15 pairs of conductors. The groups of conductors are inserted in the cable junction box through rubber passages (maximum cross-section of a group of conductors is ø 10 mm). Conductors which are going into and out of the box are immobilized with clips.

The housing of the cable junction box is made from metal sheet covered in white powder paint. For the convenience of an installer the box cover can be removed for the time of fixing. PI-T150 cable junction box contains a note card which allows for noting down connections performed by the installer. The cable junction box is safeguarded by a lock with a set of keys.

The box allows for crossing and connecting conductors. Entry blocks are connected in parallel with output blocks (thread couplings). The box allows for crossing 150 pairs of conductors of a maximum cross-section of 2.5 mm².

External cable diameter max. Ø 10 mm
Conductor cross-section max. 2,5 mm²
Number of conductors 150 pairs
Housing galvanized sheet, powder lacquer (white colour)
Ingress protection IP30C
Dimensions 630x280x45 mm
Weight ∼4800 g

Choose language