SA-K6 SOUNDER FOR FIRE ALARM SYSTEMS HOLDS DOCUMENTS ISSUED BY THE CNBOP-PIB:
- CPR CERTIFICATE NO. 1438-CPR-0010
- CERTIFICATE OF APPROVAL NO. 5301/2024
ATTENTION! Documents to be downloaded after logging in to the Client Zone
Use:
This sounder is destined for acoustic signalling with optical – point signalling (flashing LED diode) in indoor fire alarm systems. As well as for other uses in accordance with the following signal possibilities, e.g. a ISO 8201 to alarm about a wrong condition of a machine. The SA-K6 alarm device is intended for indoor applications.
Construction:
The alarm device consists of two parts. The first of which is the right alarm device in a housing of non-combustible material. It contains a supply voltage terminal and pins which allow you to select the type of sound. The alarm device has a choice of four acoustic signals. A piezoceramic transducer was used as the source of sound. With the use of the WSD-1 audible signal switch it is possible to switch off an audible signal and remain only an optical signal. The second part – a socket is a mounting element which fixes the alarm device to the ceiling or wall by the PIP-1AN cable junction box or by means of two screws and anchor pegs.
Opening:
To open the alarm device you should: twist the shade to the left while holding the base. After that move apart the shade and the base.
Closing:
To close the alarm device you should adjust the markers. After that assemble the device and twist it to the direction marked with an arrow (sequence shown in the drawing).